U0293

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. DTC CONFIRMATION

1.Erase the DTC.
2.Turn power switch OFF.
3.Perform the "Self Diagnostic Result" of BCM with CONSULT, when passed 2 seconds or more after the power switch is turned ON.
Is any DTC detected?
YES- Refer to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. VCM SELF-DIAG RESULTS

Perform "Self-Diagnostic Result" of VCM with CONSULT.
Is any DTC detected?
YES- Repair or replace the malfunctioning part.
NO- Replace BCM. Refer to "Removal and Installation" Service and Repair.