Control Unit

U1010 CONTROL UNIT (CAN)

Description

Initial diagnosis of A/C auto amp.


DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

With CONSULT
1.Turn power switch ON.
2.Select "Self Diagnostic Result" mode of "HVAC" using CONSULT.
3.Check DTC.
Is DTC detected?
YES- Refer to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. REPLACE A/C CONTROL (A/C AUTO AMP.)

Replace A/C control (A/C auto amp.). Refer to "Removal and Installation" Service and Repair.
- INSPECTION END