C1154

C1154 PNP SWITCH

Description

The transmission range switch signal is transmitted to the ABS actuator and electric unit (control unit) using the CAN communication lines.


DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. CHECK SELF-DIAGNOSIS RESULTS

Check the self-diagnosis results.





Is above displayed on the self-diagnosis display?
YES- Proceed to diagnosis procedure. .
NO- Inspection End.


Diagnosis Procedure


1. CHECK DATA MONITOR

Select "SLCT LVR POSI" in "Data Monitor" and check transmission range switch signal.





Is the inspection result normal?
YES- Replace ABS actuator and electric unit (control unit). Removal And Installation.
NO- GO TO 2

2. CHECK TRANSMISSION RANGE SWITCH

Perform transmission range switch inspection. P0705.
Is the inspection result normal?
YES- Replace ABS actuator and electric unit (control unit). Removal And Installation.
NO- Repair or replace malfunctioning components.


Special Repair Requirement


1. ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION

Always perform the neutral position adjustment for the steering angle sensor, when replacing the ABS actuator and electric unit (control unit). Special Repair Requirement.
- END