Intelligent Key

INTELLIGENT KEY

Description

The following functions are available when having and carrying the Intelligent Key.
- Door lock/unlock
- Trunk open
Remote control entry function and panic alarm function are available when operating the remote buttons.


Component Function Check

NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
- Check Intelligent Key relative signal strength
- Confirm vehicle Intelligent Key antenna signal strength

1. CHECK FUNCTION

With CONSULT
Check remote keyless entry receiver RKE OPE COUN-1 in Data Monitor mode with CONSULT.





Is the inspection result normal?
YES- Intelligent Key is OK.
NO- .


Diagnosis Procedure

NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
- Check Intelligent Key relative signal strength
- Confirm vehicle Intelligent Key antenna signal strength

1. CHECK INTELLIGENT KEY BATTERY
Check by connecting a resistance (approximately 300Ohms) so that the current value becomes about 10 mA.






Standard: Approx. 2.5 - 3.0V
Is the measurement value within specification?
YES- GO TO 2
NO- Replace Intelligent Key battery. Service and Repair.

2. CHECK KEYFOB FUNCTION

Check keyfob function using Signal Tech II Tool J-50190 or Remote
Keyless Entry Tester J-43241 (shown).
Does the test pass?
YES- Keyfob is OK.
NO- Replace keyfob. Refer to CONSULT Operation Manual.