Power Distribution Module: Service and Repair

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Removal and Installation


CAUTION:
Never remove the relays from the IPDM E/R. Tampering with the relays may cause additional incidents with the vehicle.

REMOVAL

1.Disconnect battery negative terminal.





2.Remove the IPDM E/R cover (1) while pressing the pawl (A) at the rear end of the IPDM E/R cover (1).





3.Disconnect the harness connectors from the IPDM E/R.





4.While depressing the tabs (A) remove the IPDM E/R (1) from the vehicle.

INSTALLATION

Installation is in the reverse order of removal.