Main Power Window And Door Lock/Unlock Switch

MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH

Removal and Installation


REMOVAL

1.Remove the front door grip cover. Removal And Installation.





2.Using a suitable tool, remove the clip (A) from the door grip.

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.





3.Using a suitable tool, release the metal clip and lift the main power window and door lock/unlock switch (2) and finisher (1)
as an assembly starting from the rear, pull upward to remove it from the front door finisher.
: Metal clip

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
4.Disconnect the harness connector from the main power window and door lock/unlock switch.
5.Release the pawls on each side to separate the switch finisher (1) from the main power window and door lock/unlock switch (2).
: Pawl

CAUTION:
Do not damage the pawl of the switch finisher.

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
Whenever the main power window and door lock/unlock switch is disconnected from the harness connector, it is necessary to perform the Initialization procedure. Special Repair Requirement.