Generator/Starter - Remanufactured Units Available
87olds2SUBJECT DELCO REMY GENERATOR AND PMGR NUMBER: 86-T-61
(PERMANENT MAGNET GEAR REDUCTION) STARTER SERVICE
DATE: November 12, 1986
MODELS/YEARS ALL 1986 MODELS EXCEPT CUTLASS
SUPREME AND CUSTOM CRUISER SECTION: 6D
A remanufactured unit is used to replace the new CS-121 and CS-130 generators or PMGR starter motors. Both a remanufactured unit and service parts are available for CS-144.
The service parts available for the CS-144 generator models 1105615, 1105616, 1105625 and 1105626 are listed below and are available from WDDGM through normal parts ordering procedures.
Complete CS-144 remanufactured generator assemblies will continue to be available for service when component repair is impractical.
Model Numbers
Part Number Part Name Applicable
1116408 Regulator All
1989599 Rotor 108 amp 5615, 5625
1989708 Rotor 120 amp 5616, 5626
1989705 Stator Assembly All
1989706 Frame - Slip Ring End All
1989711 Ball Bearing - Slip Ring End All
1989774 Rectifier Bridge - Pos. All
453996 Nut - Rectifier Bridge All
10497789 Connector - from Rectifier Bridge to Stator Lead All
1988971 Screw and Washer - Rectifier Bridge Attachment All
1989702 Brush Holder and Brush Assembly All
1989659 Spring Brush All
1894586 Screw - Brush Holder Attachment (Ground) All
1989699 Screw - Regulator Attachment (Insulated) All
1975471 Terminal Package - Battery All
1989703 Capacitor All
1988970 Screw Capacitor and Rectifier Bridge Attachment All
1989601 Frame - Drive End 5615, 5616
1989709 Frame - Drive End 5625, 5626
908419 Ball Bearing - Drive End All
1977674 Plate - Ball Bearing Retainer Drive End All
1975736 Screw - Ball Bearing Retainer Plate All
1985999 Collar - Shaft - Outside Drive End All
1986000 Collar - Shaft - Inside Drive End All
1978064 Collar - Shaft - Between Fan and Pulley All
1915172 Nut - Shaft - Drive End All
1941978 Lock Washer Shaft Nut D.E. All
1989690 Thru Bolt All
1985964 Pulley 5615, 5625
1989104 Pulley 5616, 5626
1978026 Fan All
A core information tag comes with the remanufactured assembly. This tag is to be completed and returned with the defective generator or starter motor.
It is very important that this tag be filled out completely. With complete information, Delco Remy will be able to quickly identify and correct any problem areas on these new products.