Label, Parts & Claim Information
CAMPAIGN IDENTIFICATION LABEL INSTALLATIONEach vehicle modified in accordance with the instructions outlined in this procedure will require a campaign identification label. Each label provides a space to include the campaign number, the five
(5) digit dealer code of the dealer performing the campaign service, and the date the vehicle was campaigned. This information may be inserted with a typewriter or ballpoint pen. When installing label, clean the surface of the radiator upper mounting support and apply the campaign label where it is readily visible.
PARTS INFORMATION
Parts are to be obtained from the Warehousing and Distribution Division of General Motors (WDDGM). These parts, when required, should be ordered from WDDGM on a C.I.O. order with no special instruction code, but on an advise code (2).
PART NUMBER QUANTITY DESCRIPTION USAGE
11504131 *2 Castellated Nut Rear Lower Control Arm Ball
Joint Stud Outer Suspension Adjustment Link
11509456 *2 Cotter Pin Rear Lower Control Arm Ball
Joint Stud Outer Suspension Adjustment Link
25522880 1 Knuckle R.H. --
(If Required)
25522881 1 Knuckle L.H. --
(If Required)
*Quantity of 3 if a knuckle is replaced
CLAIM INFORMATION
Inspect both sides. Replace ball joint stud nuts and cotter pins.
FAILURE CODE LABOR OPERATION LABOR HOURS FAILED PART NO.
96 V3560 1.0 11509456
Inspect both sides. Replace one side ball joint stud nut and cotter pin. Replace one side knuckle, ball joint stud nut, cotter pin, outer suspension adjustment link nut, and cotter pin. Align rear suspension.
FAILURE CODE LABOR OPERATION LABOR HOURS FAILED PART NO.
96 V3561 2.0 11504131
Inspect both sides. Replace both knuckles, ball joint stud nuts, and cotter pins. Replace both outer suspension adjustment link nuts and cotter pins. Align rear suspension.
FAILURE CODE LABOR OPERATION LABOR HOURS FAILED PART NO.
96 V3562 2.9 25522880
Parts will be credited at dealer cost plus 30%.
.1 hour for clerical administration may be added to the above operations.