B: A/C Compressor Clutch Test

1. With jumper between Terminal 1 and 4 of the A/C Cut-Out Relay, check the voltage to ground using a test lamp at the A/C Compressor Clutch. Leave the clutch connector in place.

^ If tests are good but clutch does not engage, replace the A/C Compressor Clutch.

^ If the test lamp does not light at the DK GRN (59) wire, check for an open in the Wire.

^ If test lamp lights at BLK (150) wire. check for an open in BLK (150) wire.