Troubleshooting Hints - Blower Controls

^ Try the following checks before doing the System Diagnosis.

1. Check Fuse 7 and Fuse 11 by visual inspection.

2. Check that grounds G103 and G202 are clean and tight.

3. Check that Blower Motor connectors and Blower Control Module connector are mated correctly and firmly seated.

4. If the Steering Wheel Controls do not operate the Radio or the Heater And A/C Controls, refer to Steering.

5. If the Steering Wheel Controls operate the Radio but do not operate the Heater And A/C Controls, replace the Heater And A/C Control Assembly.

6. If Blower runs with Ignition Switch OFF, replace Blower Control Module.

^ Go to the A/C System Check for a guide to normal operation and diagnostic references. Electronic Controls

^ Go to System Diagnosis for diagnostic tests. With Electronic Climate Control (ECC)