Alignment - Specifications, Camber Specs Changed

9232oldsmobile01

NUMBER: 92-U-26

CORP.REF.NO: 233101

DATE: March 1992

SECTION: 3A


SUBJECT:
WHEEL ALIGNMENT SPECIFICATIONS
- CAMBER SPECS CHANGED


MODELS/YEARS:
1991-92 CUSTOM CRUISER


Following are changes to specifications listed on page 3A-6 in the 1991 and 1992 Custom Cruiser Service Manuals. Vehicles are not to be realigned because of this change only. If an alignment is required due to a customer comment, then use the specifications below.

Note:
Alignment settings on new vehicles may change during the first 500 miles of use due to suspension "setting." Alignment adjustments should be made only after this break-in period.

WHEEL ALIGNMENT SPECIFICATIONS

Operation Specification in Degrees

Front
Caster 3.5 +/1.0
Cross Caster 1.0 Max

Camber 0.0 +/-0.8
Cross Camber 1.0 Max

Individual Toe-In 0.08 +/-0.1
Total Toe-In 0.16 +/-O.2

Steering Wheel Angle Level +/-2.5

Rear
Thrust Angle 0.0 +/-0.15

Please note these changes in your copies of the 1991-92 Custom Cruiser Service Manual on Page 3A-6.