Setting Procedure Information
PROCEDURE:
A. TO UNLOCK RADIO - From "LOC" display Mode on Power Up After Battery Power is Removed
RADIO DISPLAY
Display comes up "LOC" "LOC"
1. Press the set button "000"
2. Set the first digit (0-9) of your code with the seek button. "100"
3. Set the next two digits (0-99) of your code with the scan button. "123"
4. Press the am-fm button to enter the first three digits. "000"
5. Again, use seek to set the 4th digit
(0-9) of your code. "400"
6. Set the last two digits (0-99) of your code with the scan button. "456"
7. Press the am-fm button to enter the last 3 digits of your code.
Radio is unlocked and clock is displayed. "1:00"
IMPORTANT: If the backup code(s) received from the computer do not unlock the radio, another possible code is all 0's. When entering the code after step 1 above, press the AM-FM button twice.
IMPORTANT: If 8 unsuccessful tries are made to unlock the radio, the display will return to the "LOC" display, but when you press the set button, "INOP" will be displayed. This means the radio must be left powered up for 1 hour with battery and ignition applied before any more attempts to unlock the radio can be made. Anytime "INOP" is displayed, 3 more attempts will be allowed after the 1 hour waiting period with battery and ignition applied.
B. TO REMOVE CUSTOMER'S CODE-Deactivate Theft Deterrent From Unlocked Mode, Deterrent Activated.
1. With the radio off, hold in presets 1 and
4 for about 4 seconds until the display changes to "SEC".
IMPORTANT: If the display changes to the theft deterreiit is already deactivated.
2. Press the set button "000"
3. Set the first digit (0-9) of your code with the seek button. "100"
4. Set the next two digits (0-99) of your code with the scan button. "123"
5. Press the am-fm button to enter the first three digits. "000"
6. Again, use seek to set the 4th digit (0-9) of your code. "400"
7. Set the last two digits (0-99) of your code
with the scan button. "456"
8. Press the am-fm button to enter the last
3 digits of your code. "1:00"
Theft deterrent is deactivated and then "---"
clock is displayed "1:00"
C. TO ADD CUSTOMER'S CODE-Set User Code (activate) From Unlocked Mode, Deterrent Deactivated
1. With the radio off, hold in presets 1 and 4
for about 4 seconds until the display changes
to "---" "---"
IMPORTANT: If "SEC" is displayed, the theft "SEC"
deterrent is already activated. This
means the old code must be removed
first before entering a new code.
2. Press the set button. "000"
3. Set the first digit (0-9) of your code with the seek button. "100"
4. Set the next two digits (0-99) of your code with the scan button. "123"
5. Press the am-fm button to enter the first three digits. "000"
6. Again, use seek to set the 4th digit (0-9) of your code. "400"
7. Set the last two digits (0-99) of your code with the scan button. "456"
8. Press the am-fm button to enter the last
3 digits of your code. "rEP"
9. When "rEP" then "000" are displayed, repeat "000"
steps 3 through 8 of this procedure to enter
your code again before the display changes
back to clock. This confirms your customer
code, activates the theft deterrent, and
after step 8 displays the "SEC" to show the "SEC"
theft deterrent has been activated. Any time
battery power is cycled and ignition is applied
the display will show "LOC" and need to be "LOC"
unlocked by either your customer code or the
factory backup code.
D. To display Radio Display Code (Scrambled Backup Code)
IMPORTANT: In order to display this code, the radio should be in "LOC" or have" SEC" displayed before proceeding
1. Press and hold presets 2 and 3 for about 8
seconds until the first 3 digits of the display
code are displayed. "123"
2. Please write the number down. "123"
3. Press the am-fm button.
The second 3 digits of the display code are
displayed. "456"
4. Please write the numbers down. "456"
This display code can be unscrambled to get the factory backup code to unlock the radio by calling the Delco Phone number and entering the display code along with your authorization code.
E. To obtain Factory Backup Code After Obtaining Display Code (Step D)
1. After obtaining the display code in Step "D" call 1-800-537-5140 (U.S. and Canada) or (317) 4 51-8965. (You will need your six digit dealer code number).
2. When the computer prompts, using a Touchtone (TM) telephone, enter your 6 digit dealer code, then press *. For example, if your dealer code is 213063, then you would enter 213063
3. When prompted, enter the 6 digit radio display code, then press *. The computer will respond with the factory backup code. Please write it down. The computer may give you two possible codes. If the first code does not unlock the radio per step "A", then use the second code. On some models another possible backup code is O's. Refer to step 'A'to use these factory backup codes.
F. To Change Customer's Code
IMPORTANT: To change the customer's code the radio must be unlocked and no customer code stored in the radio. The radio will display clock "1:00" when unlocked. To determine if there is a customer code stored or not, press and hold presets 1 and 4 until the display changes. If "SEC" is displayed, there is a customer code stored. If is displayed, there is no code stored.
Once the radio is unlocked and the old customer code is removed by following parts A and B, enter the new customer code by following step C.