Enabling Theft Deterrent

Anti-Theft Feature

The following instructions tell how to enter a secret code into the radio. Then, if battery power is lost for any reason, the secret code must be entered again before the radio turns on.

1. Write down any six-digit number and keep in a safe place.
2. Turn ignition lock cylinder to "ACCESSORY" or "ON" position.
3. Press "PWR" button to turn radio off.
4. Press "PREV" and "FF" buttons together and hold until "---" shows on the display.

Now enter the six-digit code. Do not wait more than 15 seconds between each step.

5. Press "SET" and "000" appears on the display.
6. Press "SEEK" and hold until the first code digit appears.
7. Press "SCAN" and hold until the second and third code digits appear.
8. Press "AM-FM" and "000" appears; now enter the last three code digits.
9. Press "SEEK" and hold until the forth code digit appears.
10. Press "SCAN" and hold until the fifth and sixth code digits appear.
11. Press "AM-FM"; "REP" appears for 5 seconds, then "000" appears.
12. Repeat steps 6 through 11. "SEC" is then seen on the display, meaning the radio is secured.