Unlocking Radio After Power Loss

To Unlock Radio After Power Loss

When battery power is reapplied to a secured radio, the radio does not turn on, and "LOC" appears on the display.
Enter the security code as follows (do not pause more than 15 seconds between steps);
1. Turn ignition lock cylinder to "ACCESSORY" or "ON" position.
2. Press "SET" and "000" appears on the display.
3. Press "SEEK" and hold until the first code digit appears.
4. Press "SCAN" and hold until the second and third code digit appears.
5. Press "AM-FM" and "000" appears on the display.
6. Press "SEEK" and hold until the fourth code digit appear.
7. Press "SCAN" and hold until the fifth and sixth code digits appear.
8. PRESS "AM-FM"; "SEC" appears, and the radio can be turned on. The radio stays in secured mode.