Diagnostic Information Pg. 8A-80-8

^ If any ECM Diagnostic Trouble Codes are set see Section 6E.

TROUBLESHOOTING HINTS

(Perform before beginning System Diagnosis)

1. Check the GAGES Fuse by visual inspection.

2. Check the bulbs.

3. If more than one indicator is out, check the battery voltage and ground inputs common to all affected indicators and gages inputs.

4. Check PRNDL Fuse.

^ Refer to Section 8C for Instrument Cluster access.

^ Refer to System Diagnosis

SYSTEM DIAGNOSIS

^ Perform the System Check and refer to the Symptom Table for the appropriate diagnostic procedures.