Troubleshooting Hints

Important: To avoid misdiagnosis, check linkage for mechanical binding which would prevent correct system operation.

1. Check Convertible Top In-line Circuit Breaker
2. Check that ground G900 is clean and tight.
3. If a motor's internal circuit breaker trips, it will not reset until voltage is removed from the motor.
4. If the system checks OK electrically, check the hydraulic system.

^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check.
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.