Troubleshooting Hints - Power Windows

TRY FOLLOWING CHECKS BEFORE DOING SYSTEM CHECK:
1. Always check terminal contact before replacing any component.
2. If Express Down function does not operate, but window operates, check for battery voltage at Express Down Window Module Connector terminal A and DK BLU (164) wiring from Express Down Window Module terminal C to splice S500 for an open. If both checks are OK, replace Express Down Window Module.
3. If a motor's internal circuit breaker trips, it does not reset until voltage is removed from motor
4. If Power Windows do not operate for approximately 10 minutes (or until a door is opened) after Ignition Switch is turned to OFF, Refer to Retained Accessory Power for diagnosis. Accessory Delay Module