Troubleshootings Hints - Reclining Seats

^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).

^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other system refer to Diagnostic Aids. Diagnostic Aids


^ To avoid misdiagnosis inspect mechanical linkage for binding which would prevent smooth operation or causes system failure.

^ Check PWR ACC Circuit Breaker for an open. If open check CKT 340 for a short to ground.