Power Reclining Seat(S)

Battery voltage is applied at all times to the LH and RH Recliner Switches through CKT 340. The Recliner Switches normally ground both sides of the Recliner Motors through CKT 250/150. When the Recliner Switch is moved to "RECLINE," battery voltage is applied through CKT 277 to the Recliner Motor. With the Recliner Motor grounded through CKT 276 and the "FWD" contacts of the Recliner Switch, the Recliner Motor turns to recline the seat back. When the Recliner Switch is moved to "FWD," battery voltage is applied through CKT 276 to the Recliner Motor. With the Recliner Motor grounded through CKT 277 and the "RECLINE" contacts of the Recliner Switch, the Recliner Motor turns in the opposite direction to raise the seat back.