Manual A/C System (C61 & C67)

A/C TEMPERATURE VALVE ACTUATOR

A/C Temperature Valve Actuator:

REMOVE OR DISCONNECT

^ Disable SIR System. Air Bag(s) Arming and Disarming

1. Instrument Panel I/P assembly.
2. Temperature valve link rod from temperature valve (snap out).
3. Electrical connector from A/C temperature valve actuator.
4. Securing screws and A/C temperature valve actuator.

INSTALL OR CONNECT

1. A/C temperature valve actuator and securing screws.

TIGHTEN

^ Screws to 1.4 Nm (12 lb. in.).

2. Electrical connector to A/C temperature valve actuator.

IMPORTANT

^ Before connecting temperature valve link rod during installation, do the "Temperature Valve Link Adjustment". Adjustments

3. Temperature valve link rod to temperature valve.
4. Instrument Panel I/P assembly.

^ Enable SIR System. Air Bag(s) Arming and Disarming