Front Suspension

FRONT SUSPENSION

Ball Joint To Knuckle Refer To Procedure
Brake:
Bracket To Strut 17 Nm (13 lb ft)
Caliper To Knuckle 51 Nm (38 lb ft)
Control Arm
Front Nut 190 Nm (140 lb ft)
Rear Nut 123 Nm (91 lb ft)
Drive Axle Nut 145 Nm (107 lb ft)
Front Wheel Speed Sensor
Bracket To Strut 17 Nm (13 lb ft)
Hub And Bearing To Knuckle 95 Nm (70 lb ft)
Service Ball Joint To Knuckle 68 Nm (50 lb ft)
Stabilizer Shaft:
Bracket Bolt 47 Nm (35 lb ft)
Link Nut 17 Nm (13 lb ft)
Strut:
Housing Tie Bar Through-Bolts 37 Nm (27 lb ft)
Mount Nut 75 Nm (55 lb ft)
Mount To Body Nuts 24 Nm (18 lb ft)
To Knuckle Nuts 190 Nm (140 lb ft)
Tie Rod To Knuckle
To Align Cotter Pin 47 Nm (35 lb in)
(Do Not exceed 70 Nm (52 lb in))