Sunroof / Moonroof: Description and Operation

The Sunroof Switch controls the position of the Sunroof. The Sunroof panel may be slid open or closed.

When the Sunroof Switch is moved to the OPEN position, power is sent to the Sunroof Motor. When the Sunroof Panel reaches vent position the Vent Stop Limit Switch closes, the Soft Stop Limit Switch opens, and the Sunroof Control Module removes power from the Sunroof Motor. When the switch is pressed again and released, the Sunroof Control Module will go into express mode. The Sunroof Panel will open to full open position or until the Sunroof Switch is pressed again. When in the full open position, both the Vent Stop and Soft Stop Limit Switches will be in the open position. When the Sunroof Switch is moved to the CLOSE position, the Sunroof Panel will close until the Sunroof Switch is released or fully closed position is achieved. When in the full closed position. the Vent Stop Limit Switch will be in the open position and the Soft Stop Limit Switch will be in the closed position. The Sunroof will automatically stop at the fully open or closed position when approaching from either the vent or sliding position.