Air Inlet (Recirculation) Valve

Heater And A/C Module - Top View:

Remove or Disconnect

1. Negative battery cable.
2. HVAC module from vehicle.
3. Recirculation valve vacuum actuator from module.
4. Recirculation valve inlet housing from module.
5. Recirculation valve from inlet housing.

Install or Connect

1. Recirculation valve to inlet housing.
2. Recirculation valve inlet housing to module.

Tighten
^ Screws to 1 N.m (9 lb in).

3. Recirculation valve vacuum actuator to module.
4. HVAC module to vehicle.
5. Negative battery cable.

Tighten
^ Bolt to 16 N.m (12 lb ft).