Installation Procedure

Description:

1. Install the SDM (5) to the vehicle.
2. Install the SDM mounting fasteners (1).

Tighten
Tighten fasteners to 5.0 N.m (44 lb. in). Refer to Fastener Notice in Vehicle Damage Warnings.

3. Install the SDM harness connector (3) to the SDM (5).
4. Install the Connector Position Assurance (CPA) (2) to the SDM harness connector.
5. Position the carpet to cover the inflatable restraint Sensing and Diagnostic Module (SDM).
6. Install the passenger front carpet retainer.
7. Install the front passenger seat. Refer to Front Seat Replacement in Seats.
8. Enable the SIR system. Refer to Enabling the SIR System.