Transmission Speed Sensor: Service and Repair

REMOVAL PROCEDURE





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the electrical connector.
3. Remove the bolt holding the speed sensor.





4. Remove the vehicle speed sensor from the case extension.
5. Remove the O-ring from the vehicle speed sensor.

INSTALLATION PROCEDURE





1. Install the O-ring onto the vehicle speed sensor.
2. Install the vehicle speed sensor into the case extension.





3. Install the bolt.
^ Tighten the bolt to 11 Nm (97 inch lbs.)

NOTICE: Refer to Fastener Notice in Service Precautions.

4. Install the electrical connector.
5. Lower the vehicle.