Power Accessory Switch Panel Replacement

POWER ACCESSORY SWITCH PANEL REPLACEMENT






REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the power accessory window switch panel (3) from the door (5) by prying the front of the switch with a flat bladed tool.
3. Disconnect the electrical connectors (4) from the switch (3).

INSTALLATION PROCEDURE
1. Connect the electrical connector (4) to the switch (3).
2. Install the switch (3) to the door (5).
3. Ensure the unit is retained.
4. Connect the negative battery cable.