Instrument Panel Accessory Trim Plate

REMOVAL PROCEDURE
1. Remove the IP trim plate.
2. Remove the fasteners (2) from the IP center air outlet deflector housing trim plate.
3. Pull the trim plate rearward carefully to disengage the trim plate retaining clips (1).
Remove the trim plate.

INSTALLATION PROCEDURE
1. Align the IP center air outlet deflector housing trim plate retaining clips (1) to the IP.
Push inward in order to secure the trim plate.

NOTICE: Refer to Fastener Notice in Cautions and Notices.

2. Install the trim plate fasteners (2).

Tighten
Tighten the trim plate fasteners to 1.9N.m (17 lb in).

3. Install the IP trim plate.