Power Mirror Switch

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the trim panel retaining fasteners from the lower armrest bezel.
3. Remove the lower armrest bezel.
Using a thin-bladed tool.
4. Disengage the switch plate retainer clips.
^ Insert a small, flat-blade tool between the switch plate and the trim panel.
5. Lift the switch plate.
6. Disconnect the electrical connectors.
7. Remove the setscrew.
8. Remove the mirror switch.

Installation Procedure

1. Install the mirror control switch to the switch plate.
2. Install the setscrew.

Tighten
Tighten the set screw to 0.8 N.m (7 lb in).

3. Connect the electrical connectors.
4. Install the switch plate in the trim panel.
Push inward the switch plate.
5. Install the trim plate retaining fasteners.
6. Connect the negative battery cable.