Instrument Panel Trim Replacement - Lower Center

REMOVAL PROCEDURE




1. Remove the Instrument Panel (IP) trim plate fasteners (1).




2. Carefully pulling rearward in order to disengage the IP trim plate (1) retaining clips.
Remove the IP trim plate.

INSTALLATION PROCEDURE




1. Align the IP trim plate (1) retaining clips to the IP. Carefully push forward in order to secure the clips.




NOTICE: Refer to Fastener Notice in Cautions and Notices.

2. Install the IP trim plate fasteners (1).

Tighten
Tighten the fasteners to 1.9 Nm (17 lb in).