Instrument Panel Cluster Lens

REMOVAL PROCEDURE
1. Remove the IP cluster trim plate.
2. Remove the instrument cluster lens fasteners to the instrument cluster, if necessary.
3. Release the instrument cluster lens retainers, if necessary.
4. Remove the instrument cluster lens.

INSTALLATION PROCEDURE
Ensure the instrument cluster lens surface is completely clean before assembly.
1. Install the instrument cluster lens to the instrument cluster.
2. Carefully push inward on the outside of the lens in order to fasten the lens retainers, if necessary.

NOTICE: Refer to Fastener Notice in Cautions and Notices.

3. Install the instrument cluster lens fasteners to the instrument cluster, if necessary.

Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).

4. Install the IP cluster trim plate.