Headlamps Replacement

REMOVAL PROCEDURE
1. Remove the screws that retain the outer edge of the grille above the headlamp (2).
2. Remove the thumb screws (1) that retain the headlamp (2).
3. Pull the headlamp (2) up and out of the retaining slots.
4. Pull the inboard end of the headlamp (2) halfway out through the grille.
5. Slide the headlamp (2) inboard.
6. Pull the outboard end of the headlamp (2) out of the grille.
7. Remove the electrical connectors.
8. Remove the headlamp (2).

INSTALLATION PROCEDURE
1. Install the electrical connectors to the headlamp (2).
2. Install the headlamp (2).
3. Install the thumb screws (1) in order to retain the headlamp (2).
4. Install the screws in order to retain the outer edge of the grille.