Power Recliner Motor Replacement - Front Seat

REMOVAL PROCEDURE
1. Remove the seat.
2. Place the seat upside down on a clean, protected surface.
3. Disconnect the electrical connectors from the motor.
4. Remove the drive cables from the motor.
5. Use a drill bit in order to remove the retaining rivets.
6. Remove the motor (2).

INSTALLATION PROCEDURE
1. Install the motor (2).
2. Secure the motor with a nut and a bolt (1).
3. Install the drive cables to the motor.
4. Connect the electrical connectors to the motor.
5. Install the seat.