Exhaust Component Replacement

EXHAUST COMPONENT REPLACEMENT
The exhaust system is welded and can be serviced by the following components.
^ Exhaust manifold rear pipe (Y pipe)
^ Catalytic converter
^ Resonator/ intermediate pipe
^ Muffler and tail pipe assembly
Ensure of the following when servicing this system.
^ Make the cuts in the specified areas.
^ When installing a replacement converter to an existing exhaust or intermediate pipe/resonator assembly, remove the remaining portions of the converter inlet/outlet pipe.

Caution: If the converter and adjacent pipe are replaced, a sleeve (or spacer) that is supplied with the pipe must be used or a poor fit may result. Bodily injury may occur N exhaust gases are released under the vehicle.

^ Use a sleeve (or spacer), that is supplied with the pipe, any time the converter and adjacent pipes are replaced.