Tilt Spring - Assemble

ASSEMBLY PROCEDURE





1. Install the spring guide (1) into the tilt spring (2). Lubricate with synthetic grease.

Important: The steering column must be in the 12 o'clock position.





2. Install the tilt spring (1).
2.1. Install the tilt spring (1) to the post on the steering column support assembly (2).
2.2. Secure the tilt spring (1).

Caution: The tilt spring and the spring guide are under pressure and could become a projectile. During the disassembly and assembly procedures, secure the tilt spring. Exercise caution when removing or installing the tilt spring and the spring guide, as bodily injury may result.

3. Install the upper and lower covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle.