On Vehicle Service

Removal Procedure
1. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting.
2. Remove the exhaust system. Refer to Exhaust System.
3. Remove the manifold-to-crossover pipe.
4. Remove the steering rack retaining bolts.
5. Support the transmission.
6. Remove the right mount-to-bracket through bolt and nut.
7. Remove the rear mount-to-cradle through bolt and nut.
8. Remove the right mount.





9. Remove the transmission brace from the transmission case.

Installation Procedure





1. Install the transmission mount brace to the transmission case.

Notice: Refer to Fastener Notice in Service Precautions.

^ Tighten the bolt and the stud to 47 Nm (35 ft. lbs.).
2. Install the right mount.
3. Install the rear mount-to-cradle through bolt and nut.
4. Install the right mount-to-bracket through bolt and nut.
5. Remove the transmission support.
6. Reposition the steering rack. Tighten the steering rack.
7. Install the manifold-to-crossover pipe.
8. Install the exhaust system. Refer to Exhaust System.
9. Lower the vehicle.