Instrument Cluster Trim Panel Replacement

REMOVAL PROCEDURE
1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
2. Remove the accessory trim plates.
3. Remove the screws (3) to the cluster trim plate (1).
4. Gently pry out the cluster trim plate (1) from the instrument panel (2).

INSTALLATION PROCEDURE
1. Install the cluster trim plate (1) to the instrument panel (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws (3) to the trim plate (1).

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Install the accessory trim plates.
4. Enable the SIR system. Refer to Enabling the SIR System in SIR.