Installation Procedure

Installation Procedure

1. Install the SDM (5) to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the SDM mounting fasteners (1).

Tighten
Tighten fasteners to 5.0 N.m (44 lb in).

3. Install the SDM harness connector (3) to the SDM (5).
4. Install the Connector Position Assurance (CPA) (2) to the SDM harness connector.
5. Position the carpet in order to cover the Inflatable Restraint Sensing and Diagnostic Module (SDM).
6. Install the passenger front carpet retainer.
7. Install the front passenger seat. Refer to Seat Replacement in Seats.
8. Enable the SIR system. Refer to Enabling the SIR System.