DTC 034

CONDITIONS FOR SETTING THE DTC
A vehicle speed signal error occurs when the Control Module detects 5 or more transitions in the lateral accelerator switch input after 2 or more seconds without a vehicle speed input. If a fault is detected, the system will set error code 3 and activate the error lamp.

ACTIONS TAKEN WHEN THE DTC SETS
1. Record vehicle speed signal error.
2. Turn on both of the driver select switch L.E.D.s. The system will continue to default to zero speed damping level (Sport mode).

NOTES ON INTERMITTENTS
Refer to Intermittent and Poor Connections. Also refer to DTC 32 Lateral Accelerator Switch Error.