Instrument Cluster Trim Panel Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Handling Caution In Service Precautions.

1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
2. Remove the accessory trim plates.
3. Remove the screws (1) from the cluster trim plate (2).
4. Gently pry out the cluster trim plate (2).

INSTALLATION PROCEDURE
1. Install the cluster trim plate (2).
2. Install the screws (1) to the trim plate (2).
3. Install the accessory trim plates.
4. Enable the SIR system. Refer to Enabling the SIR System in SIR.