Fog Lamp Replacement - Front

REMOVAL PROCEDURE




1. Remove the wheel house splash shield.
2. Disconnect the electrical connector.




3. Remove the fog lamp assembly retaining bolts.
4. Remove the fog lamp assembly bracket fasteners (1).

CAUTION: Refer to Halogen Bulb Caution In Service Precautions.

5. Twist bulb to remove from the fog lamp.

INSTALLATION PROCEDURE




1. Install the bulb. Connect the electrical connector.
2. Install the tog lamp assembly bracket fasteners (1).
3. Install the fog lamp assembly retaining bolts.

Tighten
Tighten the retaining bolts to 3 N.m (53 lb in).

4. Install the wheel house splash shield.