Compact Disc Player (CD): Service and Repair

REMOTE CD PLAYER REPLACEMENT

REMOVAL PROCEDURE




1. Open the rear compartment.
2. Remove the right side rear compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Trunk/Liftgate.
3. Remove the fasteners securing the CD mounting bracket to the rear compartment.
4. Disconnect the electrical connector from the remote CD player.




5. Remove the fasteners securing the remote CD player to mounting bracket.
6. Separate the remote CD player from the bracket.

INSTALLATION PROCEDURE




1. Position the CD player into the mounting bracket.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners in order to secure the CD player to the bracket.

Tighten
Tighten the fasteners to 2 N.m (18 lb in).




3. Position the CD player and bracket into the rear compartment.
4. Connect the electrical connectors.
5. Install the fasteners in order to secure the rear compartment CD player and bracket to the vehicle.

Tighten
Tighten the rear compartment CD player bracket fasteners to 9 N.m (80 lb in).

6. Install the rear compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Trunk/Liftgate.
7. Close the rear compartment deck lid.