Perimeter Lighting Timer

Continue with the following steps in order to program the perimeter lighting timer:
1. Select Set Options.
2. Select Driver #1 Perimeter Light Timer or Driver #2 Perimeter Light Timer.
3. Select one of the following choices:
^ Delay 5 Seconds
^ Delay 10 Seconds
^ Delay 15 Seconds
^ Delay 20 Seconds
^ Delay 25 Seconds
^ Delay 30 Seconds
4. Press the ENTER button to select a setting. An asterisk appears beside the current setting. (You must turn the current setting OFF before you can turn another one ON.)