Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the cruise control cable from the cruise control module. Refer to Cruise Control Cable Replacement (W/L47) or Cruise Control Cable Replacement (W/LX5).
2. Disconnect the electrical connector (2) from the cruise control module.
3. Remove the module bracket retaining fasteners (1, 3).
4. Remove the cruise control module and bracket assembly (2) from vehicle.
5. Remove the module to bracket fasteners.
6. Remove the module from the bracket.
INSTALLATION PROCEDURE
1. Install the cruise control module (2) to the bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the module to bracket fasteners.
Tighten
Tighten the fasteners to 7.5 N.m (66 lb in).
3. Install the cruise control module and bracket assembly to the vehicle.
4. Install the module retaining fasteners (1, 3).
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
5. Connect the electrical connector (2) to the cruise control module.
6. Install the cruise control cable. Refer to Cruise Control Cable Replacement (W/L47) or Cruise Control Cable Replacement (W/LX5).
7. Inspect the component operation.
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes