Dash Integration Module Replacement

REMOVAL PROCEDURE




1. Before replacing the Dash Integration Module (DIM), record the personalization settings to transfer to the new module (if they are available).
2. Remove the right closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges and Warning Indicators.
3. Remove the DIM from the bracket by releasing the tab behind the module.
4. Disconnect the electrical connectors (1) from the DIM (2).

INSTALLATION PROCEDURE




1. Connect the electrical connectors (1) to the DIM (2).
2. Install the Dash Integration Module (DIM) into the bracket.
3. Install the right closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in instrument Panel, Gauges and Warning Indicators.
4. Reprogram the DIM. Refer to BCM Programming/RPO Configuration (DIM) or BCM Programming/RPO Configuration (IPM) or BCM Programming/RPO Configuration (RIM). Programming and Relearning