Accident With Frontal Air Bag Deployment

After a collision involving inflator module deployment, replace the following components. If you detect any damage to the mounting points or mounting hardware, repair or replace the mounting points and mounting hardware as needed.
^ Inflatable restraint IP module
^ Inflatable restraint steering wheel module
^ Inflatable restraint steering wheel module coil
^ Inflatable restraint sensing and diagnostic module (SDM)
^ Inflatable restraint electronic frontal sensor (EFS) (if equipped with dual stage air bags)

After a collision involving an inflator module deployment, inspect the Inflatable restraint steering wheel module coil and the coil wiring pigtail for melting, scorching, or other damage due to excessive heat. Perform this component inspection in addition to the inspections indicated above in Accident With or Without Inflator Module Deployment. If you detect any damage, replace the component. If you detect any damage to the mounting points or mounting hardware, repair the component or replace the hardware as needed.