Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the camshaft sensor electrical connector.
2. Remove the camshaft retaining bolt.
3. Remove the camshaft sensor.
INSTALLATION PROCEDURE
IMPORTANT: Inspect the camshaft sensor O-ring for wear or damage. If a problem is found, replace the O-ring.
1. Lubricate the camshaft O-ring with engine oil.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the camshaft sensor and sensor retaining bolt.
Tighten
Tighten the retaining bolt between 8-11 N.m (70-100 lb in).
3. Reconnect the camshaft sensor electrical connector.
4. Operate the engine, and inspect the camshaft sensor for engine oil leaks.