Turn Signal Switch Housing - Assemble - Aurora

Turn Signal Switch Housing-Assemble-Off Vehicle (Aurora)





1. Install the turn signal switch housing (2) to the steering column tilt head assembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 2 pan head tapping screws (1).
- Tighten the pan head tapping screws to 7 Nm (62 inch lbs.).





3. Slide the windshield wiper and washer switch assembly into the turn signal switch housing until the tabs lock in place.
4. If necessary, connect the windshield wiper and washer switch assembly connector.
5. Install the upper tilt head components.