Body Control Module (BCM) - Programming/RPO Configuration

NOTE: After the procedure is completed, personalization of the BCM defaults to a default setting. Inform the customer that the personalization must be set again.

The following procedure will set up the new BCM:
1. Connect a Tech 2 to the Data Link Connector (DLC).
2. Turn the ignition switch ON.
3. Select "Diagnostics" and input all of the required data to select the correct vehicle when prompted by the Tech 2.
4. Select "Body" and then "Body Control Module".
5. Select "Special Functions".
6. Select "New VIN" and follow the screen directions to input all required data.
7. Exit back to the "Special Functions" menu.
8. Select "BCM Reprogramming".
9. The scan tool will display "Do you want to setup a Body Control Module?" At the prompt, select "Setup BCM" soft-key on the scan tool.
10. The scan tool will display "Now setting up the new Body Control Module".
11. When the BCM has been setup successfully, the scan tool will display "Body Control Module setup is complete".
12. When the BCM Setup Procedure and VIN have been entered, proceed with the procedure Programming Theft Deterrent System Components in Theft Deterrent.