Programming Features - With Tech 2

To enter programming with the Tech 2, perform the following actions:
1. Install the scan tool.
2. Turn ON the ignition with the engine OFF.
3. Select the correct vehicle and model year.
4. Select Body.
5. Select Personalization.

Automatic Door Locks
Continue with the following steps in order to program the automatic door locks feature:
1. Select Set Options.
2. Select F0 for ADL (Auto Door Locks)
3. Highlight the desired mode from the following choices (see Automatic Door Lock modes above for mode descriptions):
^ Mode 1: NO ADL.
^ Mode 2: ADL out of PARK, NO unlock.
^ Mode 3: ADL out of PARK, Unlock into PARK.
^ Mode 4: ADL out of PARK, Unlock driver door ONLY.
4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
5. Select Save Options.
6. Exit the menu.

Last Door Closed Locking Mode
Continue with the following steps in order to program the LDCL (Last Door Closed Locking) Mode feature:
1. Select Set Options.
2. Select F1 for Last Door Closed Locking Mode.
3. Highlight the desired mode for the following choices:
^ LCDL Disabled.
^ LCDL Enabled.
4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
5. Select Save Options.
6. Exit the menu.

Remote Unlock Verification Mode
Continue with the following steps in order to program the Remote Unlock Verification Mode:
1. Select Set Options.
2. Select F2 for Remote Unlock Verification Mode.
3. Highlight the desired mode for the following choices:
^ NO Unlock Verification
^ Horn Only
^ DRL Only
^ DRL and Horn
4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
5. Select Save Options.
6. Exit the menu.

Remote Lock Verification Mode
Continue with the following steps in order to program the Remote Lock Verification Mode:
1. Select Set Options.
2. Select F3 for Remote Lock Verification Mode.
3. Highlight the desired mode for the following choices:
^ No Lock Verification
^ Horn Only
^ DRL Only
^ DRL and Horn
4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
5. Select Save Options.
6. Exit the menu.