Windshield Washer Switch: Service and Repair

Windshield Wiper and Washer Switch Replacement- On Vehicle

Removal Procedure





1. Remove the steering column trim covers.
2. Depress the tabs located on the top and bottom of the windshield wiper and washer switch assembly. Remove the windshield wiper and washer switch assembly.





3. Remove the 3 screws (1) from the signal switch housing assembly (2).
Remove the signal switch housing assembly (2).

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the signal switch housing assembly (2) and secure by using (3) screws (1).
^ Tighten the screws to 7 Nm (62 inch lbs.).
2. Install the windshield wiper and washer switch assembly to the signal switch housing assembly.
3. Install the steering column trim covers.